PLC Fibre Optic Splitters — 1:2 to 1:32 Dividers for FTTH and PON Networks
Distributing a fibre signal to multiple subscribers or service points? Our PLC splitters (Planar Lightwave Circuit) divide an optical signal into 2, 4, 8, 16 or 32 outputs without any electrical power supply. PLC 2.0 technology with high-purity crystal for uniform distribution (< 1 dB). SC/APC, SC/UPC and LC/APC connectors, ABS, LGX and FTTH enclosure formats.
Choosing the right PLC splitter for your installation
The choice depends on the number of outputs, the connector and the enclosure format.
1) How many outputs?
| Ratio | Loss (dB) | Typical use |
|---|---|---|
| 1:2 | ~3.5 dB | Dual service, line testing |
| 1:4 | ~7 dB | Small building, SMB |
| 1:8 | ~10.5 dB | Medium building, campus |
| 1:16 | ~13.5 dB | Large building, dense FTTH |
| 1:32 | ~17 dB | Very dense PON network |
Tip: check your optical budget (OLT power – ONT sensitivity – cable losses) before choosing the ratio.
2) Which enclosure format?
Standard, lightweight format. Fits inside FTTH distribution enclosures.
19" cassette format. For patch panels and optical drawers in racks.
Wall-mounted distribution enclosure with built-in splitter. Direct installation.
Decision matrix (30 seconds)
- Test / simple dual service → 1:2 SC/APC ABS (ref 1856)
- Small building (4 subscribers) → 1:4 SC/APC or LGX (ref 3333)
- Medium building / campus → 1:8 SC/APC (ref 2664 or 3340)
- Large building / dense FTTH → 1:16 or 1:32 (ref 2664)
- Rack / cabinet installation → LGX format (ref 3333)
- Ready-to-use wall distribution → FTTH enclosure (ref 3340)
PLC splitters and FTTH distribution enclosures
PLC splitters — SC/APC (single-mode)
Compact ABS format and FTTH enclosure. Ratios 1:2 to 1:32, SC/APC connector — the FTTH standard.
-
Promo !
Séparateur Optique de Fibre Monomode de PLC de SC/APC (2-4-8-16-32 Connecteurs) (Ref:2664)
16 comments 1×2 – 1×32 Le prix initial était : 12,99 €.11,99 €Le prix actuel est : 11,99 €. + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
Promo !
SC/APC PLC Singlemode-Glasfaser-Splitter (1×X) mit ABS-Kunststoffgehäuse (Ref:1856)
4 comments 1×2 – 1×16 Le prix initial était : 18,99 €.16,99 €Le prix actuel est : 16,99 €. + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
Boitier de distribution FTTH avec PLC type mini(sans bloc) 1*8, 1*16 (Ref:3340)
5 comments 1×8 – 1×16 39,99 € + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit
PLC splitters — LC/APC & SC/UPC + LGX format
LC/APC connector for modern networks, SC/UPC for digital links, and LGX format for rack mounting.
-
Promo !
Séparateur de Fibres Optiques (PLC Splitter) Type LGX 1*4,1*8 (Ref:3333)
11 comments 1×4 – 1×8 Le prix initial était : 29,99 €.24,99 €Le prix actuel est : 24,99 €. + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
Promo !
Séparateur de Fibres Optique, Splitteur Optique de Fibre Monomode de PLC ( LC/APC) (Ref:6423)
7 comments 1×2 – 1×32 Le prix initial était : 14,99 €.12,99 €Le prix actuel est : 12,99 €. + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
Promo !
Séparateur de Fibres Optique, Splitteur Optique de Fibre Monomode de PLC ( SC/UPC) (Ref:6440)
4 comments 1×2 – 1×32 Le prix initial était : 14,99 €.12,99 €Le prix actuel est : 12,99 €. + Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit
PLC 2.0 technology — why choose Elfcam splitters
Advantages of PLC technology
- High-purity crystal: premium glass for minimal insertion loss and extended lifespan.
- Uniform distribution: every output receives the same optical power (uniformity < 1 dB). Tested unit by unit at the factory.
- Wide bandwidth: operates across the full 1260–1650 nm range — compatible with GPON, XGS-PON, EPON.
- PLC 2.0 vs FBT: unlike FBT (fused biconical taper), PLC offers better uniformity and supports more outputs (up to 1:64).
- Passive: no electrical power, no maintenance, maximum reliability.
Real-world use cases
PLC 2.0 Planar lightwave circuit technology for high-precision division.
High-purity crystal Premium glass for minimal losses.
See also: Couplers & fibre accessories • Pigtails • PTO outlets • Racks & panels
Technical specifications — Elfcam PLC splitters
| Parameter | Value |
|---|---|
| Technology | PLC 2.0 (Planar Lightwave Circuit) |
| Bandwidth | 1260–1650 nm |
| Ratios | 1:2, 1:4, 1:8, 1:16, 1:32 |
| Connectors | SC/APC, SC/UPC, LC/APC |
| Uniformity | < 1 dB (tested unit by unit) |
| Directivity | ≥ 55 dB |
| PDL | < 0.2 dB |
| Return loss | APC ≥ 60 dB / UPC ≥ 50 dB |
| Temperature | -40°C to +85°C |
| Formats | ABS compact, LGX (19"), FTTH enclosure |
| Compliance | Telcordia GR-1209 / GR-1221 |
FAQ — PLC fibre optic splitters
1Which splitter ratio should I choose for my installation?
- 1:2 (~3.5 dB): testing, dual service
- 1:4 (~7 dB): small building, SMB
- 1:8 (~10.5 dB): medium building, campus
- 1:16 (~13.5 dB): dense FTTH
- 1:32 (~17 dB): very dense PON network — check the margin
2What is the difference between PLC and FBT?
3ABS, LGX or FTTH enclosure: which format?
- ABS: standard compact format, fits inside FTTH distribution boxes or street cabinets
- LGX: 19" cassette format for rack mounting, optical drawer or patch panel
- FTTH enclosure: full wall-mounted enclosure with built-in splitter, ready to install
4Do splitters need a power supply?
5What is uniformity and why does it matter?
6SC/APC, SC/UPC or LC/APC: which connector?
- SC/APC: French FTTH standard (carrier network, PTO, fibre box)
- SC/UPC: standard digital links, data centres
- LC/APC: modern high-density networks, SFP switches
























































