100G switch • QSFP28 • Leaf & spine • L3 managed

QSFP28 100G Optical Switch

A 100G switch is chosen on its port configuration, not on its total throughput: how many servers to connect, at what speed, and how many uplinks to reach the core. Our L3 managed chassis cover access as well as spine, with MLAG, EVPN-VXLAN and RoCEv2.

Choose my switch Leaf & spine Products
L3 managed 100G QSFP28 Ethernet switch ELFCAM
Contents
ChooseArchitectureComparisonModulesProducts

Choose my 100G switch in 30 seconds

Two questions — we show you the chassis whose port configuration matches your architecture.

Step 1 What role in your network?
Step 2 Your servers connect over… (optional)

Leaf & spine: which switch goes where?

A modern fabric has two roles only — and they do not call for the same chassis.

The leaf (access)

This is where the servers plug in: plenty of 10G or 25G ports, and a few 100G ports going up to the spine. A 48 × 25G + 8 × 100G is the most common configuration today.

The spine (core)

It sees no server at all: only 100G links to the leafs. Hence an all-QSFP28 chassis such as the 32 × 100G, with front-to-back airflow suited to hot and cold aisles.

MLAG and stacking

Two leafs in MLAG present a single aggregated link to the server while remaining two separate devices: a failure or an upgrade does not cut the service.

EVPN-VXLAN

The overlay that lets you stretch a VLAN between racks without stretching the broadcast domain — the basis of an IP fabric that scales.

Comparison of port configurations

The line that matters is the access ports: that is what sets how many servers you can connect.

RefAccess portsQSFP28 uplinksRoleWorth noting
2901324 × 10G SFP+2 × 40/100GLeafThe most compact of the range
2710048 × 10G SFP+8 × 100GLeafTrident 3, 1.28 Tbps, dual AC power supply
2710148 × 1/10/25G SFP288 × 40/100GLeafTrident 3-X7, 2 Tbps
2882448 × 10G RJ458 × 100GCopper leafThe only one connecting servers over copper
2890248 × 10/25G SFP288 × 40/100GHigh-density leafApollo cloud management
27104—32 × 100GSpineFront-to-back airflow, flexible 10/25/40/50/100G

The ports are empty: remember the modules

A switch ships without optics. Every port you use needs a module — or an AOC/DAC cable — and that budget line often exceeds the chassis itself.

100G uplinks

QSFP28 ports: 100G SR4 module on MPO/MTP for within the rack, LR4 on duplex LC for long reaches, or a DAC cable between two neighbouring racks.

10G and 25G access

SFP+ and SFP28 ports: 10G or 25G modules depending on the server's network card. The two formats are not interchangeable.

Coding compatibility

Our modules are coded for the brand of the switch and factory-tested before shipping — the port does not reject them at boot.

Configurator

The modules page carries a configurator that starts from speed and reach and ends on the right reference.

Our 100G QSFP28 switches

See also

QSFP28 & SFP28 modules

The optics that populate the ports of these switches.

10G SFP+ switches

For infrastructures that do not need 100G yet.

Racks & enclosures

House the chassis and organise the patching.

EN / EUR France FR / En
Select the country/region, the language, and the currency in which you want to shop.
Deliver to
France
Select your shipping address to estimate shipping fees and delivery time.
FR36844111856 FR72942871351 ES00284989993 ITN0078120C DE340181882 GB367772843
Mon Panier
⚑
Chargement...
Nous acceptons
PaymentPaymentPaymentPaymentPaymentPaymentPaymentPaymentPayment
Certification de Sécurité
SecuritySecuritySecuritySecuritySecuritySecuritySecurity
©2018 - 2026 ELFCAM FR All rights reserved. v10.10.52 Cookie preferences
View cart Proceed to checkout